SHANTUI SE210-9

Make: Cummins
Model: B5.9-C
Rated Power: 112 kW @ 1950 rpm
Maximum Torque: 900 N.m @ 1400 rpm
Displacement: 5.9ℓ
Cylinder: 6-102 x 120 mm (bore x stroke)
Type: 6-cylinder in line – turbocharged
Direct injection: YES
Air Filter: Two stage

Fuel tank: 330ℓ
Engine coolant: 28ℓ
Engine oil: 22ℓ
Hydraulic tank: 270ℓ
Travel motor case: 5ℓ
Swing motor case: 4ℓ
Hydraulic system total: 400ℓ

Track shoe width: 600 mm
Grouser: 26 mm
No. of track shoes each side: 2×46
Pitch: 190 mm
Ground pressure: 47.5KPA
Number of top rollers: 2×2
Number of track rollers: 2×7

Working Pump: KPM K3V112DT
Type: Variable plunger pump
Maximum discharge flow: 2 x 218 L/min
Control circuit pressure: 3.9 MPa
Boom, Arm and Bucket pressure: 34.3 MPa
Travel Circuit pressure: 34.3 MPa
Swing Circuit pressure: 25.5 MPa

Front and head guard: Optional
A/C: YES
Adjustable air suspension seat: YES
Seat belt: YES
Fire extinguisher: YES
SABS Standard Engine oil pressure meter: YES
Hydraulic oil temperature meter: YES
Coolant temperature meter: YES
Hour meter: YES
Voltage meter: YES
Vibration Absorption: YES
Impact Resistance: YES
Controls: Two Joysticks – Two Foot Pedals – Manual/Electronic Controlled Throttle.

Overall length: 12090 mm
Overall height: 3073 mm
Length from center to rear end: 2920 mm
Length between centers of drive wheel and idler: 3360 mm
Track length: 4140 mm
Clearance height under upper structure: 3055 mm
Minimum ground clearance: 470 mm
Upper structure width: 990 mm
Lower structure width: 2800 mm
Track gauge: 2200 mm

Batteries: 2x12V-120Ah maintenance free
Starter Motor: 5.4 kW
Alternator: 70A